Fluke 805 FC Mechanical Machine Vibration Meter Tester

Description

ebay template
The Following Items Are Included:
Fluke 805 FC Vibration Meter (BC# -L/T)
(2) AA Batteries
USB PC Interface Cable
User Manual
Carrying Case
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
This Item Has A Current Calibration!
Fluke 805 FC Mechanical Machine Vibration Meter
Designed specifically with process technicians in mind to simplify the pressure calibration process and provide faster, more accurate test results
Includes Carrying Case & Accessories As Listed Above!
Working Condition: Excellent
Condition: Refurbished
Calibrated: Yes
Warranty: 1 YEAR WARRANTY
Fluke 805 FC Vibration Meter
The reliable, repeatable, accurate way to check bearings and overall vibration. Make go or no-go maintenance decisions with
Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.
What makes the Fluke 805 FC the most reliable vibration screening device available?
Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
Consistent data quality at both low and high frequency ranges
Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
Exportable data via USB
Trending in Microsoft® Excel using pre-built templates
Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
Compare vibration levels with ISO-10816 severity scales and store results to the Fluke Connect Cloud
Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
Temperature measurement with Spot IR Sensor increases diagnostic capabilities
On-board memory holds and saves up to 3,500 measurements
External accelerometer support for hard to reach locations
Flashlight for viewing measurement locations in dark areas
Large screen with high resolution for easy navigation and viewing
Fluke 805 FC with Crest Factor + takes the confusion out of bearing assessment
The original Crest Factor is used by vibration analysts to identify bearing faults. It is defined as the ratio of the peak value/RMS value of a time domain vibration signal.
A key limitation of using Crest Factor to identify bearing faults is that the Crest Factor does not increase linearly as the bearing degrades. In fact, the Crest Factor can actually decrease as a bearing nears catastrophic failure due to large RMS values.
In order to overcome this limitation, Fluke uses a proprietary algorithm known as Crest Factor + (CF+). CF+ values range from 1 to 16. As the bearing condition worsens, the CF+ value increases. To keep things simple, Fluke has also included a four-level severity scale that identifies the bearing health as Good, Satisfactory, Unsatisfactory or Unacceptable.
Specifications
Vibration meter
Low frequency range (overall measurement)
10 Hz to 1,000 Hz
High frequency range (CF+ measurement)
4,000 Hz to 20,000 Hz
Severity levels
Good, Satisfactory, Unsatisfactory, Unacceptable
Vibration limit
50 g peak (100 g peak-peak)
A/D converter
16-bit
Signal to noise ratio
80 dB
Sampling rate
Low frequency: 20,000 Hz
High frequency: 80,000 Hz
Real time clock backup
Coin battery
Sensor
Sensitivity
100 mV / g ± 10 %
Measurement range
0.01 g to 50 g
Low frequency range (overall measurement)
10 Hz to 1,000 Hz
High frequency range (CF+ measurement)
4,000 Hz to 20,000 Hz
Resolution
0.01 g
Accuracy
At 100 Hz ± 5 % of measured value
Amplitude units
Acceleration
g, m/sec
Velocity
in/sec, mm/sec
Displacement
mils, mm
Infrared thermometer (temperature measurement)
Range
-20 °C to 200 °C (-4 °F to 392 °F)
Accuracy
± 2 °C (4 °F)
Focal length
Fixed, at ~3.8 cm (1.5 in)
Environmental
Operating temperature
-20 °C to 50 °C (-4 °F to 122 °F)
Storage temperature
-30 °C to 80 °C (-22 °F to 176 °F)
Operating humidity
10 % to 95 % RH (non-condensing)
Operating/ Storage altitude
Sea Level to 3,048 meters (10,000 feet)
IP rating
IP54
Vibration limit
500 g peak
Drop test
1 meter
General specifications
Battery type
AA (2) Lithium Iron Disulfide
Battery life
250 measurements
Size (L x W x H)
25.72 cm x 16.19 cm x 9.84 cm (10.13 in x 6.38 in x 3.875 in)
Weight
1.16 kg (2.55 lb)
For full Fluke 805 FC Vibration Meter product specifications, please click here:
Fluke 805 FC
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our
Ebay Test Equipment Store
. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to
contact us
for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale.
Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections)
A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED
Sell Smarter with
Kyozou
.
Inventory and Ecommerce Management