Supermicro X11DDW-NT MB Dual Processor Skylake DCO W/WIO Riser Capability

Description

Physical Stats
Form Factor
Proprietary WIO
Dimensions
12.3" x 13.4" (31.24cm x 34.04cm)
Processor/Cache
CPU
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors,
Dual Socket LGA-3647 (Socket P) supported, CPU TDP support Up to 205W TDP, 2 UPI up to 10.4 GT/s
Note
BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
System Memory
Memory Capacity
Up to 3TB 3DS ECC RDIMM, DDR4-2933MHz; Up to 3TB 3DS ECC LRDIMM, DDR4-2933MHz, in 12 DIMM slots;
Up to 2TB Intel® Optane™ DC Persistent Memory in memory mode (Cascade Lake only).
Memory Type
2933/2666/2400/2133MHz ECC DDR4 RDIMM, LRDIMM
DIMM Sizes
RDIMM: 64GB, 128GB
LRDIMM: 64GB, 128GB
3DS LRDIMM: 128GB, 256GB
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
Intel® C622
SATA
Intel® C622 controller for 14 SATA3 (6 Gbps) ports; RAID 0,1,5,10
IPMI
ASPEED AST2500
Network Controllers
Dual LAN with 10Gbase-T
from C622
Graphics
Aspeed AST2500 BMC
Input / Output
LAN
2 RJ45 10GBase-T ports
USB
6 USB 3.0 ports (4 rear + 2 via headers)
Video Output
1 VGA port
TPM
1 TPM Header
Expansion Slots
PCI-E
1 PCI-E 3.0 x32 Left Riser Slot,
1 PCI-E 3.0 x16 Right Riser Slot,
1 PCI-E 3.0 x16 for Add-On-Module (AOM)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
M.2
M.2 Interface: PCI-E 3.0 x4
Form Factor: 2242, 2260, 2280, 22110
Key: M-Key
System BIOS
BIOS Type
UEFI 256Mb
Management
Software
Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, SPM, SSM, SUM, SuperDoctor® 5, Watchdog
PC Health Monitoring
Voltage
+1.8V, +12V, +3.3V, +5V, +5V standby, Memory Voltages, Monitors CPU voltages
FAN
6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, PWM fan speed control, Status monitoring for speed control
Temperature
CPU thermal trip support, Monitoring for CPU and chassis environment
LED
CPU / System Overheat LED, UID/Remote UID, BMC/IPMI Heartbeat LED, Power LED
Other Features
Chassis intrusion detection, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Node Manager Support, RoHS, UID
5% - 95% (non-condensing)
Operating Environment
Operating Temperature Range
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
Product SKUs
MBD-X11DDW-NT
X11DDW-NT